FUDIO DIGITAL DVR
28
7.5.2.1
Video Output
Press the
UP/DOWN
button to select Ycbcr, RGB, P-Scan, PC-VGA.
Press the
OK
button to confirm.
YCbCr:
Select YCbCr when recorder output using the YPbPr (Component)
720x576i
and Video (Composite).
RGB:
Select RGB when recorder output using the Video only (Composite).
P-SCAN:
Select P-Scan when recorder output using the YPbPr (Component)
720x576p and
Video (Composite).
PC-VGA:
Select PC-VGA when recorder output using the VGA connector
720x576i
and Video (Composite)
*Notes:
(1) Don’t connect the Component Out & VGA cable to the device at the same time.
(2) If Select PC-VGA as output; YCbCr was not signal.
(3) If select YCbCr as Video Output; VGA Output was no Signal.
(4) System Default Setting: YCbCr.
