Upvel UR-104AN, User Manual

Page: 56 / 75

55
Appendix 1
Possible troubles while connecting and configuring the
router.
1. If you insert your CD into your computer drive and wait for a while, but nothing seem to
happen, it most likely indicates that the CD Autorun function of your operating system is
turned off. In that case please launch the Configuration Wizard manually. Launch Explorer ,
open your CD drive and then double-click Autorun.exe .
2. If the Configuration Wizard seem to launch successfully (on Windows 7) but nothing
happens when you click the buttons, please close the application, right-click the
Autorun.exe icon and left-click to Run as Administrator .
3. If you have no configuration CD please connect to the Internet without the router. Open your
Web-browser, go to http://www.upvel.com/support/upvel-master.html and download the
Configuration Wizard. Then connect the router according to this User Manual and launch
the Configuration Wizard from your computer.
You can also configure your router through the Web-interface (at 192.168.10.1 ). The
detailed instructions on using the Web interface are enclosed to this User Manual.
4. If you use a operation system different than Windows or MacOS, please configure your
router through the Web-interface (at 192.168.10.1 ).
5. If the router is not detected:
a. Please check the configuration of network interfaces in your computer according to
this User Manual.
b. If there are more than one active network connection on your computer, please
disable all of them except the one you use to configure the router.
c. Reset your router to factory default settings by pushing the RST/WPS button on the
back of the router for 20 seconds.