![background image](http://html.mh-extra.com/html/uprtek/pg200n/pg200n_user-manual_1061329014.webp)
23
Uses continuous measurement to measure the various values
and saves them automatically in Excel format.
Set up operation conditions
Press the “ ” setting button at the bottom of the screen to
set the Integration mode, Integration time, interval and counts
in order; press the “
” button at the bottom of the screen
when completed to return to the measurement screen and
start performing measurement.
3.6 LOGGING Mode
1
3
2
Exposure mode can
have exposure time
set
up in manual mode only.
The range of measurement
interval is 00 (hour):00
(minute):10 (seconds)
~23:59:59.
The range of continuous
measurement count is:
1~9999999 times.
■
Integration mode
■
Integration time
■
Interval
■
Counts
4
Setting complete; return to the
measurement screen.
24
3.6 LOGGING Mode
Measurement
Point optical sensor to light source
to be tested.
1
2
3
The Count option will reset to its
default settings after measurement
is done.
4
Icon at the upper right corner
spins continuously in case the
continuous measurement is in
progress.
The count field displays
balance of measurements.
This means that the
continuous measurement
has started.
To stop continuous measurement
in between, please press the“ ”
stop button.
Press the measurement button at bottom center of screen or the
measurement key at left hand side to measure. (You can press
measurement key at both sides.)