Upright AB48 HSRT, Operator'S Manual

Page: 28 / 32

26
Weekly Checks.
1. Apply grease to the slew gear wheel and all grease nipples.
Slew Drive Gears.
2 . From the Ground controls, Fully extend the Telescopic Boom and visually
inspect along its entire length for signs of wear and tear damage or
deformation.
3. Check battery acid level, top up with distilled water if required (maximum
6mm over plates when battery is standing level).
Monthly Checks.
Thorough inspection to be carried out by a competent person .(LOLER)
The unit must have a thorough inspection carried out every 6
months in accordance with
LOLER Regulations 1998 and a
Certificate of Thorough Inspection produced by a competent
person.
Always ensure the machine structure is in good, sound,
undamaged condition. Any inspection procedure is always aided
by keeping the machine clean. NB. Do not steam clean the
electrical components.
!
1
MAINTENANCE
SECTION
N