Uponor Smatrix Wave, Quick Manual

Page: 5 / 224

Safety instructions
This quick start guide to serves as a reminder for
experienced installers. We strongly recommend reading
the full manual before installing the control system.
Controller
W
ARNING
!
The Uponor system uses 50 Hz, 230 V AC
power. In case of emergency, immediately
disconnect the power.
W
ARNING
!
Electrical installation and service behind
secured 230 V AC covers must be carried
out under the supervision of a qualifi ed
electrician.
W
ARNING
!
The transformer module is heavy and might
detach if the controller is held upside down
without the cover on.
C
AUTION
!
To avoid interference, keep installation/data
cables away from power cables of more than
50 V.
C
AUTION
!
Ensure that each actuator is connected to the
correct channel so that the thermostats are
controlling the correct loops.
N O T E !
Wires between transformer and controller card
needs to be disconnected prior to detaching.
N O T E !
Connect only one actuator for each channel.
Channels 01 and 02 have double outputs (a
and b) for two actuators.
Thermostat/System device
N O T E !
Registration of at least one thermostat must
be done before registering a system device.
C
AUTION
!
The switches in the public thermostat must
be set before the thermostat is registered.
C
AUTION
!
The switches, in the public thermostat, must
be set to one of the available functions,
otherwise it cannot be registered.
Q U I C K G U I D E
5
U P O N O R S M AT R I X B A S E · Q U I C K G U I D E
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SI
SK