Uponor Smatrix Wave, Quick Manual

Page: 7 / 224

Quick Guide
Installation
1. Attach the full assembly, or parts of it, to the wall
either with a DIN rail or by using wall screws and
plugs.
2. Connect the actuators.
3. Connect a thermostat communication cable to
the controller, slave module, and/or the optional
star module.
Note: Daisy chain bus topology is
recommended. See page 10, Communications
protocol for more information.
4. Connect a communication cable to the thermostat/
timer.
5. Check that all wiring is complete and correct:
• Actuators
• Heating/cooling switch
• Circulation pump
6. Ensure that the 230 V AC compartment of the
controller is closed and the fi xing screw is tightened.
7. Connect optional external sensor (compatible
thermostats only) and set the DIP switch (public
thermostat T-143 only).
Function
Switch
Standard room thermostat
1 2 3 4
ON DIP
Standard room thermostat together with a
fl oor temperature sensor
1 2 3 4
ON DIP
Standard room thermostat, or system device,
together with an outdoor temperature sensor
1 2 3 4
ON DIP
System device where the sensor input is used
for Comfort/ECO switch over function *
1 2 3 4
ON DIP
Remote sensor
1 2 3 4
ON DIP
* Closed = ECO
8. Connect the power cable to a 230 V AC wall socket,
or if required by local regulations, to a junction box.
9. Set time and date on thermostats or timer (digital
thermostat T-148 or timer only).
10. Select thermostat control mode (settings menu 04 ,
in digital thermostats only). Default: RT (standard
room thermostat).
Register thermostats, the timer and other system
devices, in that order (next page).
X-147
10
3 s
3 s
I-143/T-148
T-148
T-146
T-149
10.1
10.2
T-148
T-146
T-149
10.3
10.4
T-148
T-146
T-149
10.5
10.2 10.4
04
8 9
Q U I C K G U I D E
7
U P O N O R S M AT R I X B A S E · Q U I C K G U I D E
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SI
SK