UPnRIDE Powered Wheelchair User Guide
Page 36 of 90
Document Version: UM-01-01_Rev B5
Step 1
Place the charger on a flat surface in a cool, dry area protected from humidity, rain and other
moisture.
Step 2
Make sure that the main power switch of both battery packs is in the On position.
Step 3
Press the Power button of the wheelchair controller to turn off the power. Refer to section 6.6:
Powering On/Off.
Step 4
Connect the cable from the charger to the socket on the right side of the wheelchair seat (1).
Figure 4-3: Charging Socket
Step 5
Connect the charger to the power socket. The battery charges until complete. Charging
automatically stops when charging is complete to prevent damage to the batteries.
Step 6
When charging is complete, unplug the charger from the AC supply (wall socket).
Step 7
Unplug the cable from the wheelchair’s power socket.
