21
®
4550-CB
INSTALLATION (cont.)
Position the bottom of the 4550-CB enclosure where it will be installed. Use four
(4) #6 screws and mount the unit using the four holes in the enclosure’s back. The
4550-CB unit’s dimensions are shown in Figure 2.
5. Place the backup battery into its location in the bottom of the enclosure.
Secure the battery in place using the metal battery bracket and nuts
provided.
6. Connect the positive (+) and negative (-) terminals of the battery to
terminals DC+ and DC- respectively on the 4550-CB terminal strip. Use 18
to 14 gauge insulated copper wire.
(INSTALLATION continued next page)
FIGURE 2:
INSIDE & OUTSIDE MOUNTING DIMENSIONS FOR
THE 4550-CB
