Uplift Desk MON042 Quick Start Manual Download Page 8

© UPLIFT Desk

 • 800-349-3839 • [email protected] • upliftdesk.com

8

Copyright Notice: 

These instructions are a component of this accessory. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available on the UPLIFT Desk website: uplift

-

desk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.

©

CAUTION:

 Read all instructions before assembly. Failure to assemble or operate properly may 

result in damage or personal injury. Retain manual for future reference.

CAUTION:

 Max monitor weight is 19.8 lbs per arm. Using a monitor over 19.8 lbs could result in 

instability causing possible injury.

CAUTION:

 Do not overtighten screws. Overtightening may cause damage to your equipment.

CAUTION:

 Leave enough slack in the cables to allow the monitor arms to move freely.

WARNING:

 Ensure the desktop is strong enough to support the combined weight of the moni

-

tor arms and attached equipment.

WARNING:

 Pinch point: Keep fingers clear of Upper Arm’s hinge when installing and making 

adjustments.

WARNING:

 

The arms will be in tension and will spring up quickly when attached equipment is re

-

moved. Do not remove equipment unless the arms have first been raised to their highest position.

CAUTION:

 Do not use on hollow core tables or desktops.

CAUTIONS & WARNINGS

!

!

!

!

!

!

!

!

!

AI-MON042-1.1

Summary of Contents for MON042









Reviews: