-27-
WARNING! ADDITIoN of RollING
hARRoW ATTAChMENT To ThE DISK
INCREASES ThE WEIGhT AND MAy CAUSE
ThE TRACToR To bECoME UNSTAblE. ADD
bAllAST AS REQUIRED, SEE TRACToR oP-
ERAToR'S MANUAl foR DETAIlS. Do NoT
EXCEED TRACToR'S 3-PoINT hITCh lIfT
CAPACITy oR bAllAST CAPACITy. REDUCE
TRAVEl SPEED.
5. Remove locknuts (9801), capscrews (9390-
122) and washers (83284) from leveling
bar(s). Position leveling bar(s) against spring
arms and secure with above hardware in the
middle hole of the arms, see Fig. 3-11. The
spike leveling bar may be placed in either
of the other mounting holes if desired, but
the middle hole is recommended for initial
set-up. See Operation Sections.
6. Raise and secure jackstands before opera-
tion.
fIG. 3-13
oM-03902A
fIG. 3-12
oM-03901
ASSEMBLY
Revised 111808-2
Summary of Contents for MAXIMUS 100
