-15-
OPERATIONS
The leveling bar is designed to improve the soil
leveling capabilities of your MAXIMUS DISK. The
leveling bar spring pressure can be increased,
to improve ground leveling (by tightening the
adjusting screw) or decreased, to improve trash
flow (by loosening the adjusting screw).
ADjUST SPRING PRESSURE
A. Loosen locknut
B.
To INCREASE SPRING PRESSURE:
-- turn adjusting screw in (Fig. 1-14)
To DECREASE SPRING PRESSURE:
-- turn adjusting screw out (Fig. 1-14)
*NOTE: The initial spring pressure adjustment
capscrew should be set at 3/4" minimum
(Fig. 1-14).
C. Retighten locknut to maintain adjustment.
NOTE: The most effective leveling and trash
flow is obtained when the leveling bar is run
at a more horizontal position with the spring
tension decreased.
lEVElING bAR WoRKING DEPTh
holE "y"
-- For DISK working depth of 1
to
4".
holE "Z"
-- For DISK working depth greater
than
4".
lEVElING bAR loCK-UP
PoSITIoN
A. For all leveling bars, the spring adjustment
capscrew must be backed off to the dimen-
sion of
1 7/8"
and then retighten the 1/2-13
jam nut (9395-010), or completely remove
the screw and jam nut (Fig. 1-15).
B. Lift-up the leveling bar until the hole
in the bracket and the slot in the arm
line-up, lock-up with 3/8-16 x 4 1/2" lg.
capscrew (9390-068) that is stored in the
arm (84900), secure in place with 3/8-16
locknut 9928 (Fig. 1-15).
oM-02392A
fIG. 1-15
fIG. 1-14
oM-03908
lEVElING bAR
Summary of Contents for MAXIMUS 100
