Uniz SLASH 2, User Manual

Page: 39 / 88

33
D UNIZ SOFTWARE
Notes
:
Overhung Structure
Model is printed layer by layer. If a point or a line or a plane is isolated and overhung in one
layer, it will fall into the Resin Tank after cured. Users need to find all islands and overhung
areas and add supports there.
Solid Model
When printing the large and solid model, please use thick supports and high support density by
even distribution to provide enough support. Another possible way to reduce the quality of the
model is to hollow it when slicing.
Slice
Press ‘Slice’ button on the main tool bar and it will open two sub menus, one on the left and one
on the right. The left menu is to start Slice and Show Slices, and the right drag bar and menu is for
customization of slice profile.
Slice Parameters
This is to customize the slice parameters of each segment of a model.

Resin Type provides different default values for different resin type.