Uniz SLASH 2, User Manual

Page: 38 / 88

32
D UNIZ SOFTWARE
Modify Support Position
This function is applicable only when a single support is selected.
Left click on the support Head and drag it to the target position to release, and the position of the
support head will be modified.
Left click on the support Base and drag it to the target position to release, and the position of the
support base will be modified.
Dragging the base of the internal support onto the platform will change the internal support to
non-internal support.
Dragging the base of the non-internal support onto the model will change the non-internal
support to internal support.
Hold down the Shift key and drag the heads of simple supports in contact with the platform the
supports will move as a whole.
If the model turns red during dragging, it means supports are invalid at this position.
Modify Support Attribute
Select one or more supports and then modify the four parameters including Diameter, Head Type,
Head Length and Touch point Size. The corresponding attributes of the model will be updated
simultaneously.
Delete Support
Once a support is selected simply click ‘DELETE’ to remove it.
Tips
:
The ‘Lift’, ‘Down’, ‘Generate’ buttons are only enabled when a model is being selected and
activated.