INSUHF0518
7
F
E
A
A
*
6. Insert the power cable
through the wire clamp and
secure it.
7. Attach the self-adhering
spacer [F] to one of the four
specially identified spots on
the external side of the back
box that will rest against the
stud.
5. Place the wire clamp [E]
in the hole.
TOP VIEW
1. Insert the fan heater’s back box in the
opening you’ve made in the wall, making
sure it is level.
5
ATTACHING THE BACK BOX TO THE WALL
2. According to your
installation, screw*
the box to the wall
stud using two
mounting holes [A].
NOTE: If the wall finishing is not ins talled
yet, make sure you position the box at
the correct depth so that it rests on the
surface once work is complete.
For 1/2 inch thick finishing, you can fold
the side tabs and install directly on the
stud. For other thicknesses, align the stud
with the corresponding perforated marks.
WALL FINISHING
* Screws not included
* Wire clamp not included
