6
Troubleshooting
Transmitter has no power
• Verify that the power supply is connected properly, (red/amber LED on the transmitter
should be lit, depending on the mode selected).
• Check the power adapter function, (green LED=ON). Replace if faulty.
No audio or poor audio quality (distortion)
• Check the input signal connection.
• Verify that the Mic/Line switch setting is in accordance with signal level and input
connected.
• Check the Audio Level Control (ALC) switch setting, (green LED=ON). If disabled, (ALC
switch=OFF), the input level should be adjusted by Vol1 and Vol2 level controls.
• Check and adjust the audio level, if necessery. The Volume Control LEDs are indicating
red occasionally if the unit is transmitting correctly.
• Make sure the transmitter and receiver are operating at the same channel/frequency,
(for best performance Stereo setting is highly recommended). Verify that both amber
and green LED at the transmitter are lit, and receivers channel switch is set in S-mode
(Stereo).
• Make sure the receivers are in the line-of-sight and range of the transmitter and the
IR-light is not blocked in any way.
Audio Level indicators are not lit
• Make sure the Indicator Light switch is in “ON” position
• Verify that the audio input is connected properly.
• Check that the Mic/Line switch setting in accordance with signal level and input
connected.
The Installation Guide is based on the information available at the time of printing and are
subject to change without notice.
