5
Placement
The unit is supplied with a universal mounting kit allowing for easy and quick installation.
Select an appropriate mounting location, considering the shape and size of the room,
to ensure optimal coverage. Recommended placement for best performance is above
2 m height, slightly angled (10-30 degrees) toward listening audience. Make sure the
transmitter has direct line-of-sight to the audience.
Operating Instructions
1. Connect the primary audio source to a suitable input:
- Balanced: XLR Input
(1)
.
- Unbalanced: 3.5mm - Line 1 and 2
(4)
or RCA – Input 1 and 2
(5)
Set Mic/Line switch
(3)
accordingly.
2. Connect the supplied power adapter to the DC supply input
(8)
and set Power switch to
“ON”. The red LED indicates power connection.
3. Set Audio Level Control (ALC) switch
(11)
to “Auto” – green LED is lit. Input level will be
adjusted automatically - recommended setting.
Note
: Setting the switch in “OFF” position will disable ALC – green LED is off. Audio level
for each input must be adjusted manually by Volume controls Vol 1 and 2
(13)
. Adjust
the input level so both LEDs flicker red occasionally, indicating audio peaks.
4. Set the carrier frequency by pressing the Channel Selection Switch
(10)
repeatedly.
Recommended setting for assistive listening mode is Stereo (2.3 and 2.8 MHz
transmission) – both amber and green LED indicates.
Note
: Make sure both transmitter and receiver are set to the same channel frequency.
