7
1
2
5
3
4
2
1
4. Safety devices
A microswitch (1) is fitted on the lever atop the dough tank cover; when the lever is lifted, the pasta maker stops running.
Every mobile part is protected by a main guard in order to prevent dragging (between rollers) or cutting (pasta cutter blade).
WE RECOMMEND THAT YOU CARRY OUT ALL ASSEMBLY, DISASSEMBLY AND CLEANING TASKS ON PARTS
WITH THE MACHINE UNPLUGGED FROM ITS SOCKET.
IT IS FORBIDDEN TO DEACTIVATE THE MICROSWITCH (1).
IT IS FORBIDDEN TO REMOVE THE SAFETY DEVICES.
Position of microswitch and safety devices and guards
Assembly of parts for pasta production
It is assumed that the pasta maker is "naked", i.e. without any assembled device.
- Assemble the dough spiral (1), locking it into place with the plug (2) and pressing the spring button installed on the plug head.
- position the tank (3) and turn it clockwise in order to lock it in place using the pins (4).
- fit the pipe (5) to open/shut discharge of the dough and turn it to the letter C (closed)
Assembly of parts for pasta production (1/2)
- insert the exhaust ductline in bronze (6), turning and locking it into place with the flywheel (7)
- push the screw conveyor (8) all the way and turn it so as to be sure its transmission is engaged.
Now, assemble the following parts, based on the pasta production cycles you wish to perform.
NOTE:
to assemble the tank (3) with the devices for discharge already assembled, position the lever (5) of the discharge conduit
on C (closed).
Assembly of parts for pasta production (2/2)
5
6
7
8
