Univex RDRE Series, Instruction Manual

Page: 29 / 44

RDRE - electric version - gas version - Page 27
MANUAL PROGRAMMING:
Select the Manual menu . Following screen appears:
– with this baking mode it is possible to divide the program to be saved into different baking
steps. It will be possible to set time, temperature, fan speed and climate in an independent way for each step of
the program, for a total of 10 steps for each program.
Press the button . The number corresponding to the Step to be programmed will light. With the arrow
buttons and the Slider set the desired baking values for this Step and confirm each value with the button .
Once the last parameter has been set (Climate) it is possible to decide to save the program as a single Step or
add other Steps. To pass to the following Step press always the icon and repeat the programming like
before. Once all desired baking parameters are set, save the program as new recipe (User), or execute it in a
single mode (Manual), always by pressing the icon .
Hereinafter it will be possible to edit and modify every time the programmed Steps with the button and pass
from one Step to another always with the same button.
Elimination of a Step:
If a Step in a program is not necessary it will be possible to cancel it with this simple
operation:

Enter the Step mode

After that enter the Setting mode
 Scrol the Steps until reaching the one to be cancelled
 Keep the button presed for 3 seconds

this Step will be cancelled and the numerical sequence of the
other steps that compose the program will be automatically up-
dated.

Save the operation with the button
ATTENTION: if the operation is not saved at the end of the cancellation of one or more Steps, the modifications
will be cancelled.