46
8H: Setting for the fan to turn off automatically after three hours of
operation
.
In order to be able to use the ceiling fan through the remote control, the receptor
included with this device must be installed before, as explained in the
installation section of this manual.
To use the remote control, you must add 2 batteries to the bottom of the remote.
All functions included in
this remote control are
similar but WIFI function
is also included on it. To
synchronize the fan with
the app, please keep "8H"
button pressed until you
hear a "tick". Please,
press the button again to
desynchronize it. For
more information about
WIFI function and how
synchronize it, read the
corresponding manual
Note:
Each
remote control is associated with the receiver included with the fan.
Note: When you turn off the fan with the remote control, the last light
setting will be saved. For example, if the light was set in “warm”
position last time you used it, the next time you turn on the fan via the
remote control the light will be in the same setting. If you turn on the fan via
your room’s switch installation, the settings will be saved too.
WINTER FUNCTION
This option involves reversing the blades to distribute the hot air that
accumulates against the ceiling, allowing continued use of your fan throughout
the year.
