43
REMOTE CONTROL CONNECTION
L : AC IN 220-240V
N : AC IN 220-240V
: Yellow/Green
Note: picture and colours of the cables are indicative. It may vary depending on
the model.
BLADE BALANCE KIT
Included in the purchased product you will find a kit supplied to prevent the
blades from moving unbalanced.
The fan may wobble during functioning due to an irregularity in th eblades or
blade support. Also, improper installation or an inlcined angle can cause
additional problems.
It is recommended to follow the next procedure to solve any of these problems
:
Make sure that all blades are screwed firmly into their mounts and are
tight to the fan body.
Looking at the fan from below, check and make sure that no blade
holder is bent so all the blades are in the correct position.
Using a ruler you can check the blade route. Simply place the ruler
against the roof vertically, and note the distance from the edge of the
blade to the roof. Carefully spin the blades with your hand to check all
