45
of up to 100°C. Synthetic laminates or adhesives or plastics that
are not resistant to high temperatures may be damaged.
•
Some types of kitchen unit finishes (eg, vinyl) are damaged and
discolour at high temperatures.
•
Make sure that the power cord is not bent or twisted, and does
not come into contact with hot product parts. After installation,
the plug must be accessible.
•
The oven is designed to be installed in spaces with standard
measures. There must be a safe distance between the product
and the walls and furniture in the kitchen. Please, install the
product according to the dimensions shown in figures 1 and 2 of
this manual.
•
For safety reasons, make sure that the oven is not in direct
contact with your electrical parts after installation.
•
If the oven is installed under a built-in hob, the distance between
these 2 appliances must be at least 50 mm.
•
Make sure that the insulating and protective parts are installed in
such a way that they can be removed without the need for a tool.
•
There must be a minimum distance of 75 mm from the lower rear
part of the enclosed space where the oven is being installed.
(See. Figure 3)
•
For more efficient air circulation, remove the rear section of the
cabin in the kitchen unit.
•
It is not recommended to install the product near a refrigerator or
freezer. Otherwise, the performance of these devices will be
adversely affected due to the heat emitted.
Summary of Contents for UBHC3-18
Page 13: ...13 Figura 2 Figura 3 ...
Page 46: ...46 Figure 1 ...
Page 47: ...47 Figure 2 Figure 3 ...
Page 70: ...70 www universalblue es ...
