Document: MAN00238A
Page 8 of 28
R:\Documents\MAN Manuals\MAN00238A BRC-15-1111R-STD-J37.doc
2. WARNINGS
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DANGER
HIGH VOLTAGE
This power supply operates at a high enough voltage and possesses
sufficient stored energy to be capable of killing a human.
DO NOT TAKE SAFETY FOR GRANTED!
Pay strict attention to the safety information and warnings in this manual.
This power supply produces extremely high voltages. DO NOT attempt to adjust any load
connection with high voltage on. DO NOT attempt to open the power supply enclosure unless the
manual has been thoroughly reviewed and the internal layout is understood. Never reach into the
enclosure unless the power has been disconnected and the output is fully discharged. Be certain of
safety ground connections.
Assuming that high voltage is always ON is the best way to avoid hazard to personnel. Always shut
off the supply circuit breaker(s) and follow an appropriate grounding procedure to discharge the
output before touching any exposed connections.
DO NOT rely on the power supply’s instrumentation or controls to determine that the output is
safely discharged. The sensors are driven by amplifiers, which are powered by an internal low
voltage power supply, as are the indicator LEDs. There may be dangerous voltages present on the
output, even if the unit appears "dead".
If not manually discharged, the output may remain charged long after power is disconnected!
DO NOT allow anyone who has not reviewed the manual to perform any part of the installation
process or to attempt servicing of the power supply. Any questions must be brought to the attention
of the manufacturer.
DO NOT obstruct the cooling inlets or outlets. Overheating can result, which may damage the
power supply.
