FLORIDA-PNEUMATIC.COM
Please contact 1-800-356-3392 for further assistance.
Operation
1
Operating the impact driver
□
This Impact Driver has a two-step trigger that delivers
higher speed with increased trigger pressure. The speed is
controlled by the amount of switch trigger depression.
□
To turn the impact driver ON, depress the switch trigger.
□
To turn the impact driver OFF, release the switch trigger.
2
Changing the rotation direction
□
The direction of the bit rotation is reversible.
□
Control the rotation direction by moving the side-mounted
switch to Forward or Reverse as required for the operation.
3
Installing and removing the bits
NOTE:
It is normal for there to be some play in the installed
bit. Use only impact quality bits with a locking groove.
WARNING:
Ensure the bit is secured in the coupler before
using the impact driver. Failure to do so could cause serious
personal injury.
To install the bits:
□
Remove the air supply from the impact driver.
□
Pull back the ball retainer and insert the bit. Release the
sleeve and the bit locks in place.
□
Pull on the bit to ensure it is secured in the coupler.
To remove the bits:
□
Remove the air supply from the impact driver.
□
With the nose of the tool pointed away from you, pull back
the ball retainer.
□
Remove the bit.
4
Driving or removing screws
□
Place the rotation direction switch in the correct position
(forward or reverse) for the operation.
□
Hold the impact driver with one hand.
□
Place the bit on the screw head and slowly depress the
switch trigger. Start the bit slowly for more control.
□
As the screw is driven, impacting will begin.
