Operating Instructions
Impact Wrench
with Fixed Torque
Control ( FTC)
MODELS: CL0060
Description
Thank you for purchasing this Campbell Hausfeld Impact Wrench with Fixed Torque
Control. For over 100 years, we have manufactured products that are durable, reliable
and just easy to use and maintain. This impact wrench is designed to have low noise
and vibration levels to create a more ergonomically correct experience for the user.
Impact wrenches are designed for removing and installing nuts and bolts. A rotating
mechanism delivers a series of blows that produces torque to remove or install a
fastener.
This series of tools are designed to have a low fixed torque in the forward
direction with full power torque in reverse. The CL0060 produces a maximum of 60 ft.
lb of torque at 90 psig in the forward direction.
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred
during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
READ & FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Overview of Safety Warning System and Your
Responsibilities
READ THIS MANUAL BEFORE USING THIS PRODUCT. FAILURE TO
FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS
MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH. KEEP THIS
MANUAL FOR FUTURE REFERENCE.
Your safety and the safety of others depend on you thoroughly reading and
understanding this manual. If you have questions or do not understand the
information presented in this manual, please call 1-800-543-6400 or visit
www.ch-commercial.com.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. The meaning of this safety alert symbol is as follows:
Attention! Become Alert! Your Safety may be at Risk. The message that
appears next to the warning which can be either written or pictorially
presented. Operations that may cause product damage are identified by the signal
word “NOTICE” in this manual.
Most tool-related incidents are caused by failure to observe basic safety rules or
precautions. You must be alert to potential hazards. You must have the necessary
training, skills and tools to perform these functions. Campbell Hausfeld cannot
IN744400AV 9/14
© 2014 Campbell Hausfeld
For parts, product & service information visit
www.ch-commercial.com
