15
Select the correct shelf position to grill
The oven door must be partially open during grill
USING SOLID PLATES HOB (U336NCP/U156):
Plate Controls:
1.
Left Front
2.
Left Back
3.
Right back
4.
Right Front
Turn corresponding knob for selected plate clockwise, the plate indicator light will
show the plate is on. Once cooking is finished, turn off the plate by turning the
knob to ‘’0’’ position.
Caution
:
The plate will remain hot for a few minutes.
Plate knob
position
Ø 145
1000W
(small plate)
Ø 180
1500W
(large plate)
Ø 180
RAPID 2000W
(Hi-speed plate)
1
100W
145W
177W
2
170W
225W
225W
3
255W
300W
300W
4
510W
865W
865W
5
750W
1150W
1150W
6
1000W
1500W
2000W
NOTE THE FOLLOWING:
To protect your plates and to ensure optimum function especially in coastal towns or
wet climates, do the following:
Switch the new plate on to the highest heat position.
Let it burn for the period of 4 minutes.
Switch the plates off and rub the surface with a small quantity of clean cooking oil.
Do not use previously used fats or cooking oils.
Repeat this treatment immediately after each plate has been used during the first
four weeks after purchase. It is important that this should be done while the plate
is still warm as the heat carbonizes the oil.
If this is repeated a sufficient number of times for each cooking plate, the pores
of the metal become filled by carbonized oil, thus sealing the surface of the plate
against the ingress of moisture or any corrosives such as salt and acid solutions.
OPERATING INSTRUCTIONS - HOBS
