Page 26
WELD SENTRY 2
(7) Select SYSTEM MENU/RESET TO DEFAULTS to reset the Weld Sentry to factory settings.
RESET SYSTEM PARAMETERS - will reset all of the Menu selections and Options to the default
settings. Schedules and Programs will not be affected.
RESET ALL SCHEDULES/PROGRAMS - will reset all of the Sentry Schedule information
including Programs A- E on the second program screen. System Parameters will not be affected.
Move the cursor to Reset System Parameters and press [ENTER]. The following will be displayed:
To confirm your selection, press [CHNG] to display YES and press [ENTER] to accept. The Sentry will
beep and display "SYSTEM PARAMETERS ARE RESET" across the bottom. If desired, move the
cursor to reset Schedules or press [RUN] to leave the screen.
(8) Select SYSTEM MENU/SYSTEM SECURITY to setup a security code which will prevent
unauthorized personnel from making program changes,
SECURITY STATUS - is changed by entering a Security Code on the bottom line of the screen.
UNPROTECTED:
System security is OFF. This is the default condition.
PROTECTED:
System security in ON. No schedule or program changes are allowed and no
system configurations can be changed. Most menus and screens can be
accessed to display information.
SCHEDULE LOCK - can be changed only when System Security is UNPROTECTED.
OFF: All schedules and programs can be accessed and used even when security is protected.
ON: Only the currently displayed schedule can be accessed or used. Schedule Lock can only be
ON when System Security is Protected.
The System Security screen is shown below. To change Security Status to Protected, enter a code number
from l to 9999999. If you wish to turn Schedule Lock ON, it must be done before entering the code. First
move the cursor to OFF, press [CHNG] to change to ON, and then move the cursor back to enter the code.
Press [ENTER] and the screen display will change to PROTECTED. Use the same code to change back to
Security Unprotected and Schedule Lock OFF. Press [RUN] to return to Run state.
Summary of Contents for WELD SENTRY 2
Page 5: ......
