T7 Topside Initial Confi guration
12
Changing The T7 Topside’s Con
fi
guration Codes
Once you have entered the programming
mode, you will have Code 1 and the
Option it is set to on the display. This
is displayed as ‘C-O’, where C is the
current Code, and the O is the currently
selected/enabled Option for that code.
While in programming mode the same
15 second time-out applies, if you take
longer then 15 seconds to change a
code’s selected option or cycle through to the next code, all settings will
be saved and the topside will time-out and resume normal operation.
While in Programming Mode
Press to change the selected Option of the displayed Code
Press to cycle to the next Code
Or press to save all settings and exit Programming Mode
3
AUX
Currently Displayed Code
Currently selected Option
Summary of Contents for T7
Page 1: ......
