T7 Topside Initial Confi guration
11
Con
fl
icting Codes
You may notice, when programming the topside that certain codes may
not be visible/selectable. This means you have another code set to an
option that con
fl
icts with the missing option. So if you program the topside
to use an air blower or third pump on the Aux button, you will no longer see
the code option allowing the Jets-2 button to operate Lo-Speed of Pump-2
(since those functions all use the same relay). Likewise, you will not be
able to set Code 5 to Option 4 if Code 1 is set to Option 2 and/or Code 2
is set to Option 1.
Entering The T7 Topside’s Programming Mode
Once you’ve gone over the code chart and have chosen the options
you want to set for each code, follow these instructions for entering the
programming mode and setting the options. There is a 15 second time-
out delay, so taking longer then 15 seconds between steps will cause the
topside to time-out and resume normal operation.
Step 1
Press and hold for 6 seconds, until display reads
Step 2
Then lift your
fi
nger and press for another 6 seconds, until the
display reads
Step 3
Then press to see the
fi
rst code
3
AUX
3
AUX
Code 1 - Option 1
Summary of Contents for T7
Page 1: ......
