United Spas T7, Installation And User Manual

Page: 10 / 24

T7 Topside Initial Confi guration
9
T7 Topside Con fi guration
Once the control box and topside have been properly installed, you can
power up the unit and program the topside for the control’s desired
equipment and operational con
fi guration.
Upon Power-Up
Whenever the T7 topside is powered on, the unit will brie fl y fl ash between
‘T7’ and the current software version by showing an ‘S’ followed by a
number (Example: ‘S04’) while it starts up. All con
fi gurable settings are
saved to permanent memory, the only thing that needs to be set upon
power-up of a T7 topside that has already been con
fi gured previously is
the time until the next fi ltration cycle start (which defaults to 1 hour).
T7 Topside Con fi guration Codes
There are fi ve codes that can be con fi gured. Each code has a number of
options the code can be set to. By default, all codes are set to their fi rst
option (Option 1).
Use the code chart on the next page to fi gure out which options you’ll need
to set for each code for the hot tub the control is being installed into.
Once you know what options all the codes should be set to, turn to the
pages that follow for instructions on entering the con
fi guration programming
mode, and how to select the different options for each code.
A video on how to get into the programming mode, and set the different
code options is available to quali
fi ed service technicians at YouTube.
Please visit the following URL to watch the video:
http://youtu.be/n-K8bLnd1oU