Turning the Voltek NS on:
Press and hold the power button for 1 second. When Voltek NS is first turned on it will be set to maximum
sensitivity. The Voltek RESET button also flashes for 15 seconds after first powering up. Pushing the
flashing reset button will reset the Voltek NS to the previously selected sensitivity level when the unit was
turned off. The Voltek NS will also perform a self test of the antenna check to ensure proper operation
(E-field strength meter will indicate self test function with a dotted line).
Adjusting the sensitivity:
The sensitivity can be adjusted using the up or down buttons. As the sensitivity increases or decreases,
the meter will display the current level of sensitivity in the overall range. When the sensitivity increases,
the range which the Voltek NS will detect E-field gets larger and the NS indicates “warning” or “shutdown”
from a further distance. Conversely, with a lower sensitivity selected the NS will indicate warning or
shutdown from a closer distance to the power line.
System Overview and operation:
Voltek NS User Guide
Page 7
sensitivity
adjustment
hydraulic/E-stop
splice wires
sensitivity level
accessory link
external siren
wire harness
antenna
in
out
12 power supply
12/24V power
E-field strength
power
hydraulics/E-stop
reset
butt splice
- OR -
butt splice
fuse holder
(continued on next page)
