PROBE BUDDY – USER MANUAL
Page 6 of 27
UPC_MAN013_R7
Copyright © United Process Controls.
All rights to copy, reproduce and transmit are reserved.
Keyboard
The PROBE BUDDY keyboard has eight keys that operate as individual keys or in
combinations of two keys.
These keys are separated into two groups, the mode group and the navigation group.
Figure 1 Mode Group Keys
Figure 2 Navigation Group Keys
Each key has a principal function, but combo keys can be used for additional operations.
1.3.1 Single Key Functions
TC / mV
toggles between the TC and mV selection when configured for output mode.
It also serves to move the cursor from the TC to the mV values. Use the arrow keys to
position the cursor and change the digit value.
IN / OUT
selects the IN/OUT mode. Both the millivolt and T/C signals shift from input
to output when this button is toggled. Output levels for either signal can be adjusted, if
ramp mode is not active. When input mode is selected, the actual signal levels are
displayed and are not adjustable.
Setup
allows access to the setup menu. Press and hold for 5 seconds to enter Setup
mode.
