United Process Controls Probe Buddy, User Manual

Page: 16 / 27

PROBE BUDDY – USER MANUAL Page 16 of 27
UPC_MAN013_R7
Copyright © United Process Controls. All rights to copy, reproduce and transmit are reserved.
Parameter Name Units or Options Range Description
TC RAMP 0, 30, 45, 60 Ramp rate in
seconds
0 disables ramp function. Ramp is
a sawtooth with ramp from offset
to span and drop back to offset.
TC OFFSET In F of C scale
depending on
TEMP SCALE
selection
32-5432°F
Or
0-3000°C
This is the minimum value the
ramp function. Default is minimum
of selected TC type. Updated only
when TC type changes.
TC SPAN In F of C scale
depending on
TEMP SCALE
selection
32-5432°F
Or
0-3000°C
This is the maximum value the
ramp function. Default is
maximum of selected TC type.
Updated only when TC type
changes.
MV RAMP 0, 30, 45, 60 Ramp rate in
seconds
0 disables ramp function. Ramp is
a sawtooth with ramp from offset
to span and drop back to offset.
MV OFFSET Starting value on
mV signal for ramp
output.
0 – 2000mV This is the minimum value of the
ramp function. Default for carbon
and dewpoint is 1000mV, 0mV for
oxygen process.
MV SPAN Maximum value of
ramp
0 – 2000mV This is the maximum value the
ramp function. Default for carbon
and dewpoint is 1800, 80mV for
oxygen.
Info General Information with diagnostic information.
Info Menu
Parameter
Name
Units or Options Range Description
MILLIVOLT
TEMP IN
MILLIVOLTS 0 to 100 Displays direct mV of
Temperature input. Shows 0 if
mode is set to output.
COLD
JUNCTION
DEG (F OR C) -20 to 255°F
-29 to 124°C
Displays actual cold junction
temperature
PROB
IMPEDANCE
Kohms 0 to 255 Displays last probe impedance
value.
IMP RECVRY
TIME
SECONDS 0 to 250 Displays last impedance
recovery time.
FIRMWARE
REV
Version number Refer to this number prior to
service.
SERIAL
NUMBER
Serial Number Refer to this number when
returning the device for service