UNITED OFFICE UAVS 300 A1, Operating Instructions And Safety Instructions

Page: 30 / 116

GB│IE
│ 27 ■ UAVS 300 A1
Emptying the waste collectors
WARNING! RISK OF INJURY!
► Remove the power plug from the power socket to prevent the appliance
from accidentally switching on .
NOTE
► Empty the waste collectors
w
/
e
regularly to prevent the shredded
material from being drawn into the cutting blades from below .
► Dispose of the waste material in an environmentally-responsible manner .
♦ Pull the large waste collector e out of the appliance base t .
♦ Take the small waste collector w out of the large waste collector e .
♦ Empty the large waste collector e and small waste collector w separately .
♦ Place the small waste collector
w
back in the large waste collector
e
(see fig . 3) .
♦ Slide the large waste collector e fully into the appliance base t again
until you hear it click into place (see fig . 4) .
Cleaning
DANGER! RISK OF ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance . There is a risk of
electric shock!
WARNING! RISK OF INJURY!
► The appliance becomes hot during use . Allow the appliance to cool down
completely before cleaning it .
► Do not touch the cutting blades of the appliance with your fingers .
The cutting blades are very sharp!
CAUTION! PROPERTY DAMAGE!
Do not spray any oil or other lubricants into the cutter openings 2 / 9 .
These can irreparably damage the appliance .
► To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning .
► Do not use caustic, abrasive or solvent-based cleaning materials . These can
damage the surfaces of the appliance .