UNITED OFFICE 366662 2101, Operating Instructions And Safety Instructions

Page: 13 / 134

■ 10 │
GB
│
IE
ULG 350 B1
Cleaning
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance .
► Ensure that moisture cannot permeate into the appliance during cleaning .
IMPORTANT
Possible damage to the appliance
► Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing .
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent .
Cleaning the inside of the appliance:
With every lamination, contaminants are deposited on the rollers inside the
laminator . Over time, this reduces the performance of the laminator .
You should therefore clean the rollers inside the laminator after use .
♦ Prepare the appliance for use, as described in the chapter Preparing for
hot lamination
, until the green indicator light Ready
3
glows .
♦ Set the pouch thickness switch
4
to 80 mic .
♦ Then guide a sheet of folded in the middle A4 paper (maximum thickness 1 .0 mm),
without a pouch and with the fold forward, slowly into the manual pouch
insertion slot
1
.
♦ Release the sheet as soon as you notice that it is being pulled in automatically .
The contaminants on the rollers inside the laminator now firmly attach themselves
to the sheet of paper . The paper will be ejected from the pouch ejector slot
7
of the laminator .
♦ Repeat this cleaning process several times . Use a fresh clean sheet of paper
each time .
When you no longer see any contaminants on the paper, the rollers inside the
laminator are clean .
Storage
♦ Store the appliance in a clean, dry place away from direct sunlight .