GB
│
IE
│
5
■
ULG 350 B1
♦
Remove the appliance, the laminating pouches and the operating instructions
from the box .
♦
Remove all packing material .
DANGER
►
Packaging material should not be used as a play thing by children . There is
a risk of suffocation!
Requirements on the installation site
For safe and flawless operation of the appliance, the installation site must comply
with the following requirements:
■
When setting it up, place the appliance on a firm, flat and horizontal surface .
■
Set up the appliance so that there is at least 30 cm of free space in front of
the laminator . Otherwise, the pouch will not be ejected completely from the
laminator after lamination .
■
Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material .
■
The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency .
Electrical connection
IMPORTANT
►
Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network .
This data must match in order to avoid any damage to the appliance .
►
Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges .
►
Ensure that the power cable is not taut or kinked .
►
Do not let the power cable hang over edges (trip wire effect) .
♦
Insert the plug into a mains power socket .
Summary of Contents for 366662 2101
Page 3: ...1 2 3 5 6 7 4 ...
