Unitech UT-1407, Operation Manual

Page: 10 / 12

Model No. : UT-1407 PAGE : 9
Parameter
Description
Range
Default Value
Password for Parameter Setting
000
Ent
pas
Values between
Password for Configuration Parameter
000
to
999
Scroll the digit by key, increase by key
PASSWORD PROTECTED MODE
Pressure Low Calibration
Apply Press. Low signal and press key
---
Lo
Prs
Pressure Low
---
Pressure High Calibration
Apply Press. High signal and press key
---
H1
prs
Pressure High
---
3. CALIBRATION MODE 3. CALIBRATION MODE
000
Ent
pas
000 999
---
Lo
Prs
---
H1
prs
4. CHANGE PASSWORD MODE
Parameter
Description Range
Default Value
000
Pas
oLd
New Password.
Scroll the digit by key, increase by key.
Values between
000
to
999
New Desired Password
Old Password.
000
Scroll the digit by key, increase by key.
Values between
000
to
999
Existing Password
As reqd.
---
000
Pas
oLd
+91 94273 01436 Sales: www.utplindia.in Website:
Sure for service with hi-end versal nology Uni Tech Sure for service with hi-end versal nology Uni Tech
E-mail : sales@utplindia.in
Add.-78/1/Z/3, Makarpura GIDC, Makarpura, Vadodara Ph : +91 7046223333
Symptom Probable Solution
-Sensor break error
-Sensor not connected
-Replace sensor
-Check the sensor is connected correctly
Keypad no
function
-Keypads are locked
-Keypads defective
-Check Keypad continuity?
All LED’s
and display
not light
-No power to controller
-Control circuit failure
-Check power lines connection
-Check Control Supply Voltages.
-Replace keypads
OPN
99.9
ERROR MESSAGE AND TROUBLESHOOTING
z z