z
TECHNICAL SPECIFICATION
z
Model No. : UT-1407
PAGE : 3
Technical Specification
Flame
Proof
Material of constructions
Cable entery
Gas group
Enclose certification
Display glass
Degree protection
I IIA IIB as per IS 2148/1981
Enclosure is certifies by C.M.R.I. dhanbad
Clear glass thognet type A as per Is 2206
IP 65 as per IS 2147
5 x 3/4 “ ET
Aluminum alloy
Technical data
Nos. of input
Input
Indication
Range
Accuracy
Transmitter power supply
Communication
Programmable
Parameters
Other
Supply voltage Power consumption
24 v DC @
4 watts maximum
Operating ambient temperature and humidity
Temperatures input
3 nos .(TEMP + RH + DP)
Set point / High scale / Low scale
- 0~50 °C
- Below 90%, non condensing
Mounting
Bricks and modules wall Flush panel mounting.
Humidity input
DP input
Integral Or Remote (external)
Integral Or Remote (external)
Integral Or Remote (external)
24V/5V DC @ 30 mA max, isolated from I/p & O/P.
Temperatures
Humidity
DP
Channel-1
: 3 digit Seven segments 0.56” RED display.
Channel-2
: 3 digit Seven segments 0.56” RED display.
Channel-3
: 3 digit Seven segments 0.56” RED display.
6-LEDs for visual alarms, buzzer for audible alarm, LED for 485-comm.
Temperatures
Humidity
DP
0 to 60.0 *C with decimal point.
0 to 99.9 % with decimal point.
-10 to 10 mm / -25 to 25mm / -100-100 mm /-200 to 200 mm wc
Display Resolution
0.1 for Temp. & Rh For DP mm wc : 0.1 / PA : 1 / Hpa
:0.01
Temperatures
Humidity
DP
0.25 % on FS
Response time : 8 sec
2.5 % for 10 to 90 % RH rest of 3% Response time : 4 sec
1 % on FS in all unit
Response time : 1 sec
Status indication
Read /write parameter
Read:
Write:
Procces value ,decimal point.
Hi Low set point.
Programmable parameter
Modbus RTU RS- 485 Isolated communications.
Baud rate , Parity , Node address , stop bit.
Communication Protocol
Full range as per input selection.
Programming of parameters
Through 4 tactile keys (with password protections)
No. of slave ID
Total 1-256 unit.
Alarm logic
Full Scale hi OR Full scale Low
MOC
Full S S 316 plate and box , back side wall mounting M S covers.
FDA 21 CFR part 11 - GAMP-4 compatible.
LEDs. S
Microcontroller based indicator with inbuilt Temperature, RH & DP measurement in single enclosure.
All channel are programmable ranges and unit.(Through Front key pad).
Incorporates highly stable built-in Pressure Sensor and T+RH Sensor.
3 Digit, 0.56" bright LED display for displaying DP, RH & Temperature.
Process parameter Hi and Low
tatus indication For All three channel.
User selectable set limits for process value violation.
Inbuilt buzzer to audible process value violation.
Password protection for calibration and programming mode.
Software Calibration for 3 channels.
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
Programmable devise address, baud rate, parity and stop bit.
Remote programmable from master device.
User programmable offset correction.
Compact, All Stainless Steel enclosure with 35 mm depth for installation in prefab panels.
Brick and modular wall mounting and flush mounting.
FDA21 CFR part 11 compliance data logging software available
Ex. Flameproof model available for Hazardous applications.
+91 94273 01436
Sales:
www.utplindia.in
Website:
Sure for service with hi-end
versal
nology
Uni
Tech
Sure for service with hi-end
versal
nology
Uni
Tech
E-mail :
Add.-78/1/Z/3, Makarpura GIDC, Makarpura, Vadodara
Ph
:
+91 7046223333
Summary of Contents for UT-1407
Page 12: ......
