Unitech UT-1405, Instruction Manual

Page: 15 / 18

@
sales@utplindia.in +91 7046223333 , 9427301436
www.utplindia.in
www
UT-1405
TEMP. AND DIFF. PRESS. INDICATOR
13
I. : Input 1 [TEMP.] Low Calibration.
1p12
Apply to Low / Zero signal to Input 1 [TEMP.] and press key.
Calibration of Individual input(Only applicable to External analog input)
2. : CALIBRATION OF INPUT.
CAL1
4.3 Calibration Mode
‘Calibration Mode’ Mode will shown by pressing key, after Mode display.
SETP
Scroll the digit by key, Increase by key.
1. : CALIBRATION MODE PASSWORD
PASS
Password for Mode Parameters
CAL
Default Password for access Setup mode : 1234
II. : Input 1 [TEMP.] High Calibration.
1p1s
Apply to High / Span signal to Input 1 [TEMP.] and press key.
IV. : Input 2 [DP] High Calibration.
1p2s
Apply to High / Span signal to Input 2 [DP] and press key.
III. : Input 2 [DP] Low Calibration.
1p22
Apply to Low / Zero signal to Input 2 [DP] and press key.
II. : Input 1 [TEMP.] High Calibration.
r1s
IV. : Input 2 [DP] High Calibration.
r2s
III. : Input 2 [DP] Low Calibration.
r22
I. : Input 1 [TEMP.] Low Range.
r12
Set Low / Zero Display Range to Input 1 [TEMP.]
Display range Of Individual input(Only applicable to External analog input)
2. : DISPLAY RANGE OF INPUT.
rEnG
Set High / Span Display Range to Input 1 [TEMP.]
Set Low / Zero Display Range to Input 2 [DP]
Set High / Span Display Range to Input 2 [DP]