Unitech UT-1405, Instruction Manual

Page: 14 / 18

@
sales@utplindia.in +91 7046223333 , 9427301436
www.utplindia.in
www
UT-1405
TEMP. AND DIFF. PRESS. INDICATOR
12
4.2 Setup Mode
‘Setup Mode’ Mode will shown by pressing key, after Mode display.
Conf
Scroll the digit by key, Increase by key.
1. : SETUP MODE PASSWORD
PASS
Password for Mode Parameters
SETP
Default Password for access Setup mode : 1111
ASSIGN SET POINTS FOR EACH INPUT ALARMS
Set the alarm Set Point for Audio [Buzzer] front LED.
Alarm action is as per Configuration Mode Alarm Type [
]
ALTP
Set point for Input-1[TEMP.] Alarm-1
II. : Input 1 [TEMP.] Alarm 2 Set Point.
1sp2
III. : Input 1 [TEMP.] Alarm 3 Set Point.
1sp3
IV. : Input 1 [TEMP.] Alarm 4 Set Point.
1sp4
VI. : Input 2 [DP] Alarm 2 Set Point.
2sp2
VII. : Input 2 [DP] Alarm 3 Set Point.
2sp3
VIII. : Input 2 [DP] Alarm 4 Set Point.
2sp4
V. : Input 2 [DP] Alarm 1 Set Point.
2sp1
2. : Input 1 [TEMP.] Alarm 1 Set Point.
1sp1
Set any value between Input-1 Low value to high value.
Set any value between Input-1 Low value to high value.
Set point for Input-1[TEMP.] Alarm-2
Set any value between Input-1 Low value to high value.
Set point for Input-1[TEMP.] Alarm-3
Set any value between Input-1 Low value to high value.
Set point for Input-1[TEMP.] Alarm-4
Set any value between Input-2 Low value to high value.
Set point for Input-2[DP] Alarm-3
Set any value between Input-2 Low value to high value.
Set point for Input-2[DP] Alarm-4
Set point for Input-2[DP] Alarm-1
Set any value between Input-2 Low value to high value.
Set any value between Input-2 Low value to high value.
Set point for Input-2[DP] Alarm-2