20
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
15. Click a desired time period (for example,
00002359
) to set for 24 hours of access in this week-
day. Click
OK
. The period code
7F
displays on the table cell.
16. In the
Attendance Mode Setting
box, select
None
.
17. Click
Set Group Info
, on the top center of the screen.
Utilize JanitorLite to manage time and attendance through the following:
1.
Set MT180 to a computer on the same subnet network.
NOTE:
Switch the controller operation mode to
Attendance
, and synchronize the date and
time in MTTool.
2.
On the computer screen click
start
o
All Programs
o
JanitorLite
o
JanitorLite
.
3.
Click
Controller
o
Controller Management
.
