To charge the device using the docking station:
1. Plug the AC adapter cable into the power jack on the docking station.
2. Plug the AC adapter into an electrical outlet.
3. Slide the device into the docking station until it clicks into place.
The connection is secure when the bottom edge of the device is aligned
tation
g:
g complete
status icon appears on the device screen
smoothly with the docking station, and the LED indicator on the docking s
and device lights up red.
LED status during chargin
– Solid red: Charging
– Solid green: Chargin
If the battery level becomes low, a
indicating low
or very low battery
status. In both cases, perform an
ActiveSync ope tion to back up your ata, and then recharge your device a
soon as possible. If the battery level reaches a low status, the device will enter
a sleep mode and cannot be powered up until the battery is charged. Windows
Mobile 5.0 devices will retain installed applications and data when the main
battery is completely drained for extended periods of time.
Powering On the PA500II
ra
d
s
After you have initially charged your device for about 16 hours, the device is
ready to be used. You can now start up your device where you can calibrate
the screen, set up the system time zone, and learn some basic stylus usage.
7
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
