Unitech PA400, User Manual

Page: 46 / 65

- 34 -
gives you the option to connect to one. Turn Wi-Fi off when not in use to save
battery power and possibly speed up other processes.
NOTE: If your unit is connected to a PC that is connected to the Internet, the
unit will use the PC’s Internet connection and Wi-Fi will not show up
in the Wireless Manager screen. You may allow the simultaneous use
of the PC and the Wi-Fi module by tapping the checkbox next to Allow
wireless connection on the device when connected to the desktop
under File > Connection Settings in the ActiveSync UI.
To change the Wi-Fi settings, tap Menu / Wi-Fi Settings.
1. Wi-Fi by default is disabled. Tap Menu / Turn on Wi-Fi.
2. Tap the network you want to connect to. The networks with three or four
bars provide a better connection. Tap OK.
3. Tap Connect to begin using an open network. If the network does not
require passwords, no changes are required.
4. If the network requires authentication, a Network Authentication dialog will
open. For networks that require network keys, enter the network key into
the dialog box and tap Connect to begin using the network.
5. Under Network Adapters tab, changes can be made to what your network
card connects to and to modify adapter settings.
Advanced: You can set specific Wi-Fi settings required by some networks.
Administrators can also set a password to limit access to configuration settings.
Exchange ActiveSync: Exchange ActiveSync, a component of Exchange
Server, facilitates data synchronization between your unit and an Exchange
server. This synchronization can occur over a network connection, allowing you
to update calendars, contacts, tasks and the Inbox on your unit without directly
connecting to a PC. The server must be running Exchange Server 2003 SP2 or
later.
To use Exchange ActiveSync, confirm with your system administrator that an
Exchange Server is available. The administrator will provide you with a login
name, password, server name, and domain name. To configure Exchange
ActiveSync on your unit, tap / ActiveSync / Menu / Add Server Source. Enter
the user name, password and domain and tap Next. Choose the data types
you want to synchronize and tap Finish. Enter the server address and confirm