Unitech PA400, User Manual

Page: 43 / 65

- 31 -
Using Additional Hardware Features
Chapter 6
Flashlight
The LEDs for the camera flash can also be used as a flashlight. Tap Start ( ) /
Torch to toggle the Flashlight on and off.
Assigning Buttons (hardware keys)
Tap Start ( ) / Settings / Personal / Buttons. Under Program Buttons, your
favorite programs can be assigned to several of the keypad buttons. The list
of assignable buttons is shown on the left hand side with the program that
is assigned by default on the right. To reassign a button, select the button in
section 1 and change to the desired program or action from the pull-down list
in section 2.
You can customize the way your Up/Down control repeats by changing the
settings under the Up/Down Control tab.
Compass Calibration
To re-calibrate the compass, tap / Settings / System / Compass Calibration.
Tap on Calibrate to begin.
1. Hold the unit level and press the Enter key. Press Enter key.
2. Rotate the unit 180 degrees (while keeping it horizontal) and press the Enter
key again. Rotate and press Enter key.
3. Rotate the unit upside down and press the Enter key again. Rotate upside
down and press Enter.