Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for Code 93 to
any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length
- Select this option to decode only Code 93 symbols
containing a selected length. Select the length using the numeric bar codes in the
appendix of
Numeric Bar Codes
. For example, to decode only Code 93 symbols
with 14 characters, scan
Code 93 – One Discrete Length
, and then scan
1
followed by
4
. To correct an error or to change the selection, scan the
Cancel
bar
code.
Two Discrete Lengths
- Select this option to decode only Code 93 symbols
containing either of two selected lengths. Select lengths using the numeric bar
codes in the appendix of
Numeric Bar Codes
. For example, to decode only Code
93 symbols containing either 2 or 14 characters, select
Code 93 – Two Discrete
Lengths
, and then scan
0
,
2
,
1
, and then
4
. To correct an error or to change the
selection, scan the
Cancel
bar code.
45
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Summary of Contents for MS842
Page 1: ...2D Imager Scanner MS842 User s Manual Version 1 5 ...
Page 2: ......