EAN-8/JAN-8
Enable/Disable EAN-8/JAN-8
To enable or disable EAN-8/JAN-8, scan the appropriate bar code below.
Code 128
Enable/Disable Code 128
To enable or disable Code 128, scan the appropriate bar code below.
Set Lengths for Code 128
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for Code 128 to
any length, one or two discrete lengths, or lengths within a specific range.
Note: When setting lengths for different bar code types, enter a leading zero for
single digit numbers.
One Discrete Length
- Select this option to decode only Code 128 symbols
containing a selected length. Select the length using the numeric bar codes in the
appendix of
Numeric Bar Codes
. For example, to decode only Code 128 symbols
with 14 characters, scan
Code 128 - One Discrete Length
, and then scan
1
followed by
4
. To correct an error or change the selection, scan the
Cancel
bar
code.
Two Discrete Lengths
- Select this option to decode only Code 128 symbols
containing either of two selected lengths. Select lengths using the numeric bar
codes in the appendix of
Numeric Bar Codes
.
For example, to decode only Code 128 symbols containing either 2 or 14
characters, select
Code 128 - Two Discrete Lengths
, and then scan
0
,
2
,
1
, and
then
4
. To correct an error or change the selection, scan the
Cancel
bar code.
50
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Summary of Contents for MS842
Page 1: ...2D Imager Scanner MS842 User s Manual Version 1 5 ...
Page 2: ......
