7-69
Once the selected type of barcode is set OFF, then the corresponding
barcode data will not be accepted by the terminal
?
decoder.
7.1.3. WIEGAND
After press [E] key, the terminal will prompt in sequence to toggle ENABLE or
DISABLE the accepting permission for the following format: 26-Bit, 36 Bit and
UNFORMATTED.
7.1.4. SECURITY SWITCH
SECURITY
Toggle ON or OFF to activate or deactivate the security alarm.
Press [
?
] to toggle ON/OFF, and then press [E] after making a choice.
The system will go back to the first part of the main menu for the next selection.
7.2.
Terminal Configuration
The MR350MKII supports a terminal emulator which can be used as a dummy
ASCII terminal.
TERM ID
Each MR350MKII "terminal" is identified by an ASCII string ID of
up to 7 characters. In default, the Terminal ID is defined as "
MR350
". The valid
characters are alphanumeric only ('A'-'Z', 'a'-'z', '0'-'9').
ONLINE
Use the [
?
] key to choose between REMOTE and LOCAL, and then
press [E].
REMOTE
The MR350MKII will transmit the scanned barcode
data or keyboard input data to the Host port
immediately.
LOCAL
Input data will not be transmitted to the Host port.
ONLINE
REMOTE
< DEVICE SETUP >
WIEGAND
TERM I.D.
MR350
< DEVICE SETUP >
SECURITY SW
Summary of Contents for MR350 MKII
Page 92: ...8 92...