background image

25

Chapter 2  

Using the Hardware

When FormCaching is enabled, a data file named FORM.DAT will be created in the 
HT580. FORM.DAT stores the data as entered by the user when usng the 
FormCaching program. The HT580 will not allow the user to redefine the data fields in 
FormCaching once the FORM.DAT has been created. The file FORM.DAT must be 
deleted in order to implement any change in the configuration of FormCaching.

Running FormCaching

The HT580 bult-n applcaton FormCachng can be run from the man menu by 
selectng the termnal opton, then selectng 2. Formcachng.  The FormCachng 
application will follow the prompt settings previously defined by the user to request 
input, and stores the data in the FORM.DAT file.

HT580 FormCaching Defaults 

The HT580 enables FormCachng wth the default settngs:

DATA FIELD DEFINITION: Feld number=2

Category

Settng

Feld #1      FIELD PROMPT

ITEM:

DATA LENGTH

20

FIELD TYPE

ALPHANUM

DEVICE TYPE

BOTH

Feld #2 FIELD PROMPT

QTY:

DATA LENGTH

8

DATA TYPE

ALPHANUM

DATA RECORD DEFINITION

Category

Settng

FIELD DELIMITER

,

RECORD DELIMITER

CR

DATE STAMP FIELD

NONE

TIME STAMP FIELD

NONE

FIELD DELAY

1

Summary of Contents for HT580






































Reviews: