20
Supervisor Mode
When enterng nto Supervsor mode, you wll be requred to nput a password. The
default password s “580”. From the Supervsor settngs menu, you are gven the
followng optons:
Communication < COMM >
Ths feature s used to set up communcaton ports, optons and protocols. Below are all
of the settngs and ther optons.
ITEM
OPTIONS
DEFAULT
PORT
RS232/USB , BLUETOOTH, MODEM
RS232/USB
BAUD RATE
9600bps, 19200bps, 38400bps, 57600
bps
Default for both RS232
and Bluetooth s
38400bps.
PARITY
NONE, ODD, EVEN
NONE
DATA BITS
8, 7
8
STOP BITS
1, 2
1
PROTOCOL
MULTI, NONE
Mult
ADDRESS
“A” ~ “Y” or “0” ~ “6”
A
Port
The 4 port nterfaces are connected to the same seral port on the HT580. If modem or
RS232 s selected, any output data from the HT580 wll be sent to those ports. (If USB
s selected, the HT580 stll communcates va seral port emulaton.) For Bluetooth,
please refer to the secton “Communcaton” for a gude through Bluetooth
communcaton setup.
Address
It s necessary to set a unque address f the user wants to dentfy each termnal
separately for communication. There are 32 different available addresses, “A” ~ “Y” and
“0” ~ “6”.
Chapter 2
Using the Hardware
1. COMM 2. TERM
3.FORM 4. PWR
5.PSWD 6. BAR
7. DIAG 8. SYS
