![background image](http://html1.mh-extra.com/html/unitec/mab-150/mab-150_operating-instructions-manual_3983432018.webp)
2 0
T r o u b l e s h o o t i n g
M A B 1 5 0
ENGLISH
T r o u b l e s h o o t i n g
F a u l t
P o s s i b l e c a u s e
R e m e d y
The motor does not start after
pressing the ON/OFF switch
or stops during operation.
Plug not inserted into socket.
Insert plug.
Automatic circuit breaker
tripped.
Switch on on automatic circuit
breaker
Magnetic clamp not switched
on.
Switch on the magnetic
clamp.
The automatic circuit breaker
in the electrical distribution
board trips.
Too many appliances
connected to the same power
circuit.
Reduce the number of
appliances on the power
circuit.
The machine is defective.
Contact customer service.
The magnetic clamp does not
function.
Magnet not switched on.
Switch on magnet.
The surface is not magnetic.
Use a suitable base.
Tools wear excessively/are
damaged.
No lubrication or not
sufficiently greased.
Supply lubrication
(e.g.:use pump bottle
for cutting oil/drilling
emulsion (C)).
The lubrication system does
not function.
No lubricant available.
Top up the lubricant.
Lubricant tap closed.
Open the lubricant tap.
Connecting nipple (4)
clogged.
Clean container and
connecting nipple (4).
NOTE
►
If you cannot resolve the problem with the steps described above, please contact
customer service.
Summary of Contents for MAB 150
