background image

1

                     

             

   

ITEM #0098162

   

MODULAR 5 BURNER GAS GRILL

MODEL #BG179A

               

   

ATTACH YOUR RECEIPT HERE

Serial Number  

     

  

Purchase Date             

    

Questions, problems, missing parts? 

Before returning to your retailer, call our

customer service department at

1-800-963-0211

, 8 a.m. - 6 p.m., EST, Monday - 

Thursday, 8 a.m. - 5 p.m., EST, Friday.

WARNING

Improper installation, adjustment,
alteration, service or maintenance 
can cause injury or property
damage. Read this instruction
manual thoroughly before installing
or servicing this equipment.

WARNING

1. Do not store or use gasoline or

other flammable vapors and
liquids in the vicinity of this or any
other appliance.

2. An LP tank not connected for use

should not be stored in the vicinity
of this or any other appliance.

DANGER

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open the lid.
4. If the odor continues, keep away

from the appliance and
immediately call your gas supplier
or fire department.

WARNING

For Outdoor Use Only

Master Forge & M Design® is a
registered trademark of LF, LLC.
All rights reserved. 

Español p. 39

Español p. 39

Français  p. 39

Español  p. 77

0

8

5

3

1

B

A

Summary of Contents for BG179A







































Reviews: